DEPARTMENT OF EDUCATION

Professional Standards Board

FINAL

ORDER

1557 Technology and Engineering Teacher

I. SUMMARY OF THE EVIDENCE AND INFORMATION SUBMITTED

Pursuant to 14 Del.C. §§1203, 1205(b), and 1220, the Professional Standards Board, acting in consultation and cooperation with the Delaware Department of Education ("Department"), developed amendments to 14 DE Admin. Code 1557 Technology and Engineering Teacher. The regulation concerns the requirements for a Technology and Engineering Teacher Standard Certificate in accordance with 14 Del.C. §1220. The proposed amendments in this regulation include revising subsection 4.1.1.4, which concerns the requirements for an applicant who has completed a minimum of 91 days of successful long-term substitute teaching in a Delaware public school, and striking subsection 5.3.2. The revisions to subsection 4.1.1.4 and striking subsection 5.3.2 were prompted by HB 315 w/ HA 2 of the 151st General Assembly, which was signed into law on August 4, 2022. In addition, in Section 2.0, the definition of "Regionally Accredited" has been revised based on the changes the U.S. Department of Education made to its recognition of accrediting bodies and the term "Employing Authority" has been revised to eliminate a redundant phrase. Also, subsection 4.1.2 has been revised to add an additional assessment as an option and subsection 6.2 has been added to clarify Section 6.0.

Notice of the proposed regulation was published in the Register of Regulations on July 1, 2024. The Professional Standards Board did not receive any written submittals concerning the proposed regulation.

II. ASSESSMENT OF THE IMPACT ON ACHIEVEMENT OF THE STATE'S GREENHOUSE GAS EMISSIONS REDUCTION TARGETS AND RESILIENCY TO CLIMATE CHANGE

The Secretary of Education has reviewed the proposed regulation as required by 29 Del.C. §10118(b)(3) and has determined that any assessment of the impact of the proposed regulation is not practical.

III. FINDINGS OF FACTS

On August 1, 2024, the Professional Standards Board voted to propose 14 DE Admin. Code 1557 Technology and Engineering Teacher, in the form attached hereto as Exhibit A, for adoption by the Department subject to the State Board of Education's approval.

The Department finds that the proposed amendments to the regulation are necessary to implement 14 Del.C. Ch. 12 and are designed to improve the quality of the Delaware educator workforce and to improve student performance. Accordingly, the Department finds that it is appropriate to amend 14 DE Admin. Code 1557 Technology and Engineering Teacher.

IV. DECISION TO AMEND THE REGULATION

For the foregoing reasons, the Department concludes that it is appropriate to amend 14 DE Admin. Code 1557 Technology and Engineering Teacher subject to the State Board of Education's approval. On August 15, 2024, the State Board of Education approved amending 14 DE Admin. Code 1557 Technology and Engineering Teacher. Therefore, pursuant to 14 Del.C. §§1203, 1205(b), and 1220, 14 DE Admin. Code 1557 Technology and Engineering Teacher, attached hereto as Exhibit A, is hereby amended.

V. TEXT AND CITATION

The text of 14 DE Admin. Code 1557 Technology and Engineering Teacher amended hereby shall be in the form attached hereto as Exhibit A and said regulation shall be cited as 14 DE Admin. Code 1557 Technology and Engineering Teacher in the Administrative Code of Regulations for the Department.

VI. EFFECTIVE DATE OF ORDER

The effective date of this Order shall be ten days from the date this Order is published in the Register of Regulations.

IT IS SO ORDERED the 15th day of August, 2024.

Department of Education

Mark A. Holodick, Ed.D., Secretary of Education

Approved this 15th day of August, 2024.

State Board of Education

*Please note: Electronic signatures ("/s/") were accepted pursuant to 6 Del.C. §12A-107(d).

1557 Technology and Engineering Teacher

This regulation shall apply to the issuance of a Technology and Engineering Teacher Standard Certificate pursuant to 14 Del.C. §1220(a). This Technology and Engineering Teacher Standard Certificate is required to teach Technology and Engineering Education in grades 5 to 12 in a Delaware public school.

The following words and terms, when used in this regulation, shall have the following meaning:

"Department" means the Delaware Department of Education.

"Educator" means a person licensed and certified by the State under 14 Del.C. Ch. 12 to engage in the practice of instruction, administration or other related professional support services in Delaware public schools, including charter schools, pursuant to rules and regulations promulgated by the Professional Standards Board and approved by the State Board of Education. The term 'educator' does not include substitute teachers.

"Employing Authority" means any entity which employs educators, and includes, but is not limited to, school districts, charter schools, boards of directors, and management companies.

"Immorality" means conduct which is inconsistent with the rules and principles of morality expected of an educator and may reasonably be found to impair an educator's effectiveness by reason of the educator's unfitness or otherwise.

"License" means a credential which authorizes the holder to engage in the practice for which the license is issued.

"Regionally Accredited" means educational accreditation by a regional accrediting agency that is recognized by the U.S. Secretary of Education as a reliable authority concerning the quality of education offered by the institutions of higher education it accredits, including Middle States Commission on Higher Education institutional accreditation from an agency that was designated as a regional accreditor before July 1, 2020, and is currently recognized by the U.S. Secretary of Education as a reliable indicator of the institution's educational quality.

"Standard Certificate" means a credential issued to certify that an educator has the prescribed knowledge, skill or education to practice in a particular area, teach a particular subject, or teach a category of students.

"Standards Board" means the Professional Standards Board established pursuant to 14 Del.C. §1201.

“Technology and Engineering Education” means the study of STEM in the core contexts of: Computation, Automation, Artificial Intelligence, and Robotics; Material Conversion and Processing; Transportation and Logistics; Energy and Power; Information and Communication; the Built Environment; Medical and Health-Related Technologies; Agricultural and Biological Technologies. The study is defined by the core disciplinary standards and practices identified in the Standards for Technological and Engineering Literacy.

"Valid and Current License or Certificate" means a current full or permanent certificate or license as an educator issued by another state or jurisdiction. This means the applicant is fully credentialed by having met all of the requirements for full licensure or certification as an educator in another state or jurisdiction and is in good standing in that state or jurisdiction. It does not include temporary, emergency, conditional certificates of eligibility or expired certificates or licenses issued from another state or jurisdiction.

3.1 In accordance with 14 Del.C. §1220(a), the Department shall issue a Technology and Engineering Teacher Standard Certificate to an applicant who:

3.1.1 Holds a valid Delaware Initial, Continuing, or Advanced License or a Standard or Professional Status Certificate issued by the Department prior to August 31, 2003 and meets the requirements in Section 4.0 of this regulation; or

3.1.2 Has met the requirements for an educator's license in Delaware and presents proof of a Valid and Current License or Certificate as a technology and engineering teacher issued by another state or jurisdiction.

3.2 Notwithstanding any provision to the contrary herein, the Department shall not act on an application for a Technology and Engineering Teacher Standard Certificate if the applicant is under official investigation by any national, state, or local authority with the power to issue educator licenses or certifications. The Department shall not act where the allegations include but are not limited to conduct such as Immorality, misconduct in office, incompetence, willful neglect of duty, disloyalty, or falsification of credentials until the applicant provides evidence of the investigation's resolution.

4.1 For an applicant who does not hold a content area Standard Certificate, the applicant shall have satisfied the requirements in subsections 4.1.1 and 4.1.2.

4.1.1 The applicant shall have satisfied 1 of the following education requirements:

4.1.1.1 Earned a bachelor's degree from a Regionally Accredited college or university with a minimum of 30 semester hours of coursework in Technology and Engineering Education from an educator preparation program approved or recognized by the Council for the Accreditation of Educator Preparation (CAEP) or a state where the state approval body employed the appropriate standards; or

4.1.1.2 Satisfactorily completed an alternative routes for licensure or certification program to teach Technology and Engineering Education as provided in 14 Del.C. §§1260 - 1266; or

4.1.1.3 Satisfactorily completed a Department-approved educator preparation program in Technology and Engineering Education; or

4.1.1.4 If the applicant is applying for an Initial License after the applicant completed a minimum of 91 days of successful long-term substitute teaching in a Delaware public school as provided in subsection 4.1.3.1 of 14 DE Admin. Code 1510, earned a bachelor's degree from a Regionally Accredited college or university in any content area and also satisfactorily completed 15 college credits or an equivalent number of hours in professional development with 1 credit equating to 15 hours taken either as part of a degree program or in addition to a degree program from a Regionally Accredited college or university or a professional development provider approved by the Department related to Technology and Engineering Education of which at least 6 credits focus on pedagogy. If the applicant has been issued an Initial License and a Technology and Engineering Teacher Emergency Certificate after the applicant has completed a minimum of 91 days of successful long-term substitute teaching in a Delaware public school, as provided in subsection 4.1.3.1 of 14 DE Admin. Code 1510, in order to be issued the Technology and Engineering Teacher Standard Certificate, the applicant shall have satisfactorily completed 15 college credits from a Regionally Accredited college or university in generic or content-specific education courses that are applicable to the Technology and Engineering Teacher Standard Certificate of which at least 6 credits focus on pedagogy and as approved by the Department. A course is applicable to the Technology and Engineering Teacher Standard Certificate if the course is equivalent to a course that is included in the curriculum of an equivalent education degree from a program approved by the Department.

4.1.1.4.1 The applicant, in consultation with the applicant's Employing Authority, shall select the 15 credits or the equivalent number of hours in professional development subject to the Department's approval.

4.1.1.4.2 If the applicant does not have an Employing Authority or is applying for a Standard Certificate outside of the applicant's current spectrum of employment, the applicant shall select the 15 credits or the equivalent number of hours in professional development in consultation with the Department and subject to the Department's approval.

4.1.1.4.3 For the purpose of subsection 4.1.1.4, professional development means a combination of focused, in-depth learning, practice, feedback, reflection, and expert support experiences designed to change the participants' attitudes, insights, and perspectives and ultimately results in improved professional practice.

4.1.1.4.4 Professional development hours may be approved if the applicant shows that the activity meets all of the following criteria:

4.1.1.4.4.1 Relevant courses from a Regionally Accredited college or university in Technology and Engineering Education are not available to the applicant online or in the applicant's county of residence; and

4.1.1.4.4.2 The activity is grounded in research and current best practices as judged by the Department's content specialist in Technology and Engineering Education; and

4.1.1.4.4.3 The activity is documented by the provider to provide knowledge and skills that are required for the Technology and Engineering certification; and

4.1.1.4.4.4 The activity is part of a professional development program that includes knowledge acquisition, skill mastery, descriptive feedback, and refinement of practice in the work setting.

4.1.2 The applicant shall have achieved a minimum score of 159 on the Praxis Subject Assessment - Technology Education (ETS Test Code # 5051) on 1 of the following examinations. Notwithstanding the foregoing, if the applicant did not achieve the minimum score, the applicant shall meet the requirements set forth in 14 DE Admin. Code 1519 Multiple Measures for Demonstrating Content Knowledge.

4.1.2.1 A minimum score of 159 on the Praxis Subject Assessment - Technology Education (ETS Test Code # 5051); or

4.1.2.2 A minimum score of 157 on the Praxis Subject Assessment - Technology and Engineering Education (ETS Test Code # 5053).

4.1.2.3 Notwithstanding subsections 4.1.2.1 and 4.1.2.2, if the applicant did not achieve the minimum score, the applicant shall meet the requirements set forth in 14 DE Admin. Code 1519 Multiple Measures for Demonstrating Content Knowledge.

4.2 For an applicant who holds at least 1 content area Standard Certificate, the applicant shall have achieved the minimum score on the examination 1 of the examinations as provided in subsection 4.1.2. Notwithstanding the foregoing, if the applicant did not achieve the minimum score, the applicant shall meet the requirements set forth in 14 DE Admin. Code 1519 Multiple Measures for Demonstrating Content Knowledge.

5.1 If an applicant is applying for an Initial License, a Standard Certificate must be applied for simultaneously with the application for the Initial License, and the applicant shall also provide all required documentation for the License.

5.2 If the applicant is also applying for the issuance or renewal of an educator's license or paraeducator's permit, the applicant must disclose the applicant's criminal conviction history upon application. Failure to disclose a criminal conviction history is grounds for denial of the license or permit application as specified in 14 Del.C. §1219 and it could delay the processing or result in the denial of the application for a Technology and Engineering Teacher Standard Certificate.

5.3 For an applicant who does not hold a content area Standard Certificate, the following documentation is required with the application for a Technology and Engineering Teacher Standard Certificate:

5.3.1 Official transcript from the applicant's Regionally Accredited college or university.

5.3.1.1 Electronic transcripts may be submitted by the Employing Authority or by the applicant's Regionally Accredited college or university; or

5.3.1.2 Sealed paper transcripts may be submitted.

5.3.1.3 The Department will not accept copies of transcripts; and

5.3.2 Documents verifying successful completion of Department-approved professional development, if applicable; and

5.3.3 5.3.2 Official score on the Praxis Subject Assessment as provided in subsection 4.1.2; and

5.3.4 5.3.3 Additional documentation as required by the Department.

5.4 For an applicant who holds at least 1 content area Standard Certificate, the following documentation is required in the application for a Technology and Engineering Teacher Standard Certificate:

5.4.1 Official score on the Praxis Subject Assessment as provided in subsection 4.2; and

5.4.2 Additional documentation as required by the Department.

5.5 For applicants who have met the requirements for licensure as an educator in Delaware and hold a Valid and Current License or Certificate as a technology and engineering teacher from another state or jurisdiction, the following documentation is required in the application for a Technology and Engineering Teacher Standard Certificate:

5.5.1 An official copy of the Valid and Current License or Certificate; and

5.5.2 Additional documentation as required by the Department.

6.1 The Secretary of Education may, upon the written request of a local school district or charter school, review credentials submitted in an application for a Technology and Engineering Teacher Standard Certificate on an individual basis and grant such a Standard Certificate to an applicant who otherwise does not meet the requirements for a Technology and Engineering Teacher Standard Certificate but whose effectiveness is documented by the local school district or charter school.

6.2 The request shall be approved as provided in subsections 6.2.1 and 6.2.2.

6.1.1 6.2.1 For school districts, requests shall be approved by the superintendent of the school district.

6.1.2 6.2.2 For charter schools, requests concerning the head of school of the charter school shall be approved by the charter school's board of directors and requests concerning all other applicants shall be approved by the charter school's head of school.

7.1 A Technology and Engineering Teacher Standard Certificate is valid regardless of the assignment or employment status of the holder provided that the Educator's License remains current and valid.

7.2 A Technology and Engineering Teacher Standard Certificate is not subject to renewal.

8.1 An Educator's Technology and Engineering Teacher Standard Certificate may be revoked, suspended, or limited for cause as provided in 14 DE Admin. Code 1514 Limitation, Suspension, and Revocation of Licenses, Certificates, and Permits.

8.2 An Educator's Technology and Engineering Teacher Standard Certificate shall be revoked if the Educator's Initial, Continuing, or Advanced License or Standard or Professional Status Certificate is revoked or the Educator made a materially false or misleading statement in the Educator's application in accordance with 14 Del.C. §1222.

8.3 An Educator whose certificate is noticed for disciplinary action is entitled to a full and fair hearing before the Standards Board. Hearings shall be conducted in accordance with 14 DE Admin. Code 1515 Hearing Procedures and Rules.

The Department shall recognize a Technology Education Teacher Standard Certificate issued prior to the effective date of this regulation. An Educator holding such a Standard Certificate shall be considered certified to teach Technology and Engineering Education.

10.1 All applicants and Educators are required to update their contact information in DEEDS if their contact information changes.

10.2 An Educator who legally changes the Educator's name and wishes to change the name on the Technology and Engineering Teacher Standard Certificate shall provide a notarized copy of evidence of the name change such as a marriage license or court action.

10.3 An applicant or Educator whose mailing address, email address, or phone number changes shall provide the Department with the new mailing address, email address, or phone number within 14 calendar days of the change.