1.3 A licensed manufactured home installer must oversee all aspects of the installation of a manufactured home; however, multiple licensed installers may be involved in the installation of a particular home at the discretion of the licensee who certifies the installation on the decal required by Regulation 11.0. The licensed manufactured home installer who certifies the installation on the decal affixed to the data plate is responsible for the installation and certifies that the installation was performed in accord with all applicable law, including the Board's statute and regulations.
1.4.2 No manufactured home installation license is required for persons who are currently certified, licensed, or registered by other boards or commissions of this State and who act within the scope of activity for which they are currently licensed, certified or registered. Examples include, but are not limited to, plumbers, electricians and well and septic installers.
2.1.1 Applications may be obtained over the Internet at the Division of Professional Regulation's website. Applications may also be obtained in person during regular business hours or by mail from the Division of Professional Regulation.
2.2 The Board may require additional information or explanation when it has questions about an applicant's qualifications or application materials. An application is not complete until the Board has received all required and requested documents, materials, information and fees.
2.2.1 Applications which are incomplete shall be retained for one year to allow an applicant the opportunity to supplement the application. After one year, incomplete applications are destroyed. Thereafter, an applicant must submit a new application with the appropriate fee.
3.1.1 Evidence in a form satisfactory to the Board that the applicant has successfully passed the examination designated by the Board. Evidence shall include confirmation from the Division or other authorized testing agency that the applicant has achieved a passing score on the Board-approved examination.
3.1.2 Evidence in a form satisfactory to the Board that the applicant has completed education requirements set forth in Rule 4.0. Evidence shall include a certificate or other acknowledgment of completion of the education requirement that is submitted to the Board by the education provider. This document shall identify the course, the course provider and location, and the date completed.
3.1.3 Evidence in a form satisfactory to the Board that the applicant is at least 18 years old. Such evidence includes a certified copy of the applicant's birth certificate, a passport, an identification card issued by the State of Delaware or a driver's license issued by the State of Delaware.
3.1.4 Evidence in a form satisfactory to the Board that the applicant, or the applicant’s employer, holds a surety bond or irrevocable letter of credit issued by a federally-insured financial institution in an amount equal to or greater than $10,000. Evidence shall include the original bond or original letter of credit submitted to the Board by the provider of the bond or the letter of credit. Where a bond is submitted, the Division of Professional Regulation shall be listed as the bond holder.
3.1.5 Evidence in a form satisfactory to the Board that the applicant, or the applicant’s employer, carries liability insurance in an amount equal to or greater than $100,000. Evidence shall include a notarized certificate of insurance submitted to the Board by the insurance carrier.
3.1.6 A statement under oath or other verification satisfactory to the Board that the applicant agrees to be responsible for all acts or omissions of any individual acting under the supervision of the applicant while assisting in the installation of manufactured housing.
22.214.171.124 An applicant for licensure as a manufactured home installer by reciprocity shall complete an application approved by the Board and cause a certificate of good standing to be sent to the Board from the licensing agencies of all jurisdictions where the applicant is or has been licensed. Upon request an applicant for licensure under this provision must submit to the Board a copy of the reciprocal state's current licensure requirements
3.2.2 Evidence in a form satisfactory to the Board that the applicant has successfully completed the certification course designated by the Board. Evidence shall include a certificate or other acknowledgment of completion of the education requirement that is submitted to the Board by the education provider. This document shall identify the course, the course provider and location, and the date completed.
3.2.3 Evidence in a form satisfactory to the Board that the applicant is a full-time, part-time or casual/seasonal employee of an authorized inspection agency. Evidence shall include a current written statement signed by the applicant's supervisor in his capacity as a supervisor identifying the applicant's employment status and date of employment.
4.1.1 Training courses must provide at least fifteen (15) hours of education. An "hour" for purposes of this requirement shall mean fifty (50) minutes of instruction or participation in an appropriate course or program. Meals and breaks shall be excluded from credit.
5.2.2 The Statute governing this Board, Title 24, Chapter 44 of the Delaware Code; and
5.2.3 The Board's Rules and Regulations, 24 DE Admin. Code 4400.
5.3 Applicants who fail the examination two consecutive times must successfully complete a Board-approved training course after failing the second test and prior to sitting for the examination a third time. Applicants who fail the examination a third time must wait one year from the date of the third test and must re-apply for licensure.
6.1 The biennial licenses and certificates granted by the Board shall lapse on September 30th of each even numbered year beginning in 2008, or on such other date as is specified by the Division of Professional Regulation. It is the responsibility of the licensee to file a renewal application with the Board. The failure of the Board to notify a licensee or certificate holder of the expiration date does not in any way relieve the licensee of the requirements of filing a renewal application with the Board. License and certificate renewal shall be accomplished online at the Division of Professional Regulation's website.
6.2 Each applicant for renewal must retain proof of completing the continuing education requirements. Extra continuing education hours do not carry over to the next licensing or certification period. Renewal applications will be audited by the Board for compliance with the continuing education requirements.
6.3 A license or certificate is lapsed when a licensee has failed to either complete the requirements for renewal or obtain permission for inactive status. A licensee or certificate holder may activate a lapsed license or certificate within one year of the date the renewal application was due by meeting all renewal requirements and paying an additional fee set by the Division of Professional Regulation.
6.4 An individual whose license or certificate has lapsed for more than one year must reapply as a new applicant. The applicant must take the examination required by §4416(b)(3) and achieve a passing score unless he or she previously passed an approved licensure test that covered the applicable law and standards in effect at the time of the new application.
7.2 Each inactive license and certificate shall expire at the end of the biennial licensing and certificate period applicable to active licensees, which is September 30 of even-numbered years beginning in 2008. An inactive license or certificate may be renewed for two years by application to the Division upon attestation of completion of 10 hours of continuing education in the past two years.
7.3 An inactive license may be reactivated by the Board upon written request on a form designated by the Board, proof of insurance and bond, proof that the licensee has completed the requisite continuing education, and payment of a prorated fee to be computed by the Division of Professional Regulation.
7.4 An inactive certificate may be reactivated by the Board upon written request on a form designated by the Board, proof of completion of the requisite continuing education, and payment of a prorated fee to be computed by the Division of Professional Regulation.
7.5 A licensee or certificate holder is not authorized to work as a licensed manufactured home installer or certified manufactured home installation inspector, respectively, in this State during the period of inactive status.
8.1.2 An "hour" for purposes of continuing education credit shall mean fifty (50) minutes of instruction or participation in an appropriate course or program. Meals and breaks shall be excluded from credit.
8.3.2 Course providers, licensees and certificate holders may request Board approval of courses at any time by submitting a written request to the Board and including a course outline with the number of classroom hours and the curriculum vitae or resume of the instructor.
8.3.3 Course providers, licensees and certificate holders seeking pre-approval should submit the request a sufficient amount of time in advance of the CE course to permit the Board to consider the request at a regularly-scheduled Board meeting.
8.5 Random audits will be performed by the Board to ensure compliance with the license and certificate requirements. Licensees and certificate holders selected for the random audit shall submit verification that they maintain the required bond and liability insurance, verification of required employment status, and the completion of the required CE, as applicable and any other information required by the Board to confirm their continued eligibility for the license or certificate.
8.5.3 The Board shall review all documentation submitted by licensees pursuant to the CE audit. If the Board determines that the licensee has met the CE requirements, his or her license shall remain in effect. If the Board determines that the licensee has not met the CE requirements, the licensee shall be notified and a hearing may be held pursuant to the Administrative Procedures Act. The hearing will be conducted to determine if there are any extenuating circumstances justifying the noncompliance with the CE requirements. Unjustified noncompliance with the CE requirements set forth in these rules and regulations shall constitute a violation of 24 Del.C. §4441(a) and the licensee may be subject to one or more of the disciplinary sanctions set forth in 24 Del.C. §4441.
9.1 Manufactured homes shall be installed, at minimum, in accordance with Section 4421(b) of this chapter and all applicable regulations of the United States Department of Housing and Urban Development ("HUD)," as set forth in the Code of Federal Regulations ("C.F.R."). HUD requirements are available online at www.dpr.gov.
9.2 Site suitability. Pursuant to 24 C.F.R. §3285.103, prior to the initial installation of a new manufactured home, the installer shall verify that the design and construction of the home, as indicated on the design zone maps provided with the home, are suitable for the site location where the home is to be installed.
9.3.1 Soil conditions. Pursuant to 24 C.F.R. §3285.201, the manufactured home's foundation shall be constructed on firm, undisturbed soil or fill compacted to at least 90 percent of its maximum relative density, and the site shall be graded to ensure adequate drainage. Pursuant to 24 C.F.R. §3285.202, the soil classification and bearing capacity shall be determined before the foundation is constructed and anchored.
9.3.2 Drainage. Pursuant to 24 C.F.R. §3285.203, drainage shall be provided to direct surface water away from the manufactured home to protect against erosion of the foundation supports and to prevent water build-up under the home. All drainage shall be diverted away from the home and must slope a minimum of one-half inch per foot away from the foundation for the first ten feet.
9.4 Foundation construction. Foundations for manufactured home installations shall be designed and constructed in accordance with 24 C.F.R. §§3285.301 - 3285.315 and must be based on site conditions, home design features, and the loads the home was designed to withstand, as shown on the home's data plate.
9.4.1 Piers. Pursuant to 24 C.F.R. §3285.302, the piers used shall be capable of transmitting vertical live and dead loads to the footing or foundation. Pier materials, design, loads, configuration and location shall meet the requirements set forth at 24 C.F.R. §§3285.303 - 3285.312.
9.4.2 Footings. Pursuant to 24 C.F.R. §3285.312, materials approved for footings shall provide equal load-bearing capacity and resistance to decay. Footings shall be placed on undisturbed soil or fill compacted to 90 percent of maximum relative density. A footing shall support every pier. Footing materials, placement, and sizing shall meet the requirements set forth at 24 C.F.R. §3285.310.
9.5 Anchoring. Pursuant to 24 C.F.R. §§3285.401 - 3285.406., the manufactured home shall be secured against the wind, including wind in the longitudinal direction, by use of anchor assembly type installations or by connecting the home to an alternative foundation system, as set forth at 24 C.F.R. §3285.301. Ground anchor installations shall meet the requirements for certification and testing, specifications, number and location set forth at 24 C.F.R. §3285.402.
9.6 Installation of optional features. Optional features, such as expanding rooms, appliances, and skirting, shall be installed pursuant to the requirements set forth at 24 C.F.R. §§3285.501 - 3285.505.
9.6.1 Comfort cooling systems. Pursuant to 24 C.F.R. §3285.503, when not provided and installed by the home manufacturer, any comfort cooling systems that are installed shall be installed according to the appliance manufacturer's installation standards. Installation of any comfort cooling system shall meet the requirements set forth at 24 C.F.R. §3285.503(a).
9.7.1 Ductwork connections. Multi-section homes with ductwork in more than one section require crossover connection to complete the ductwork system of the manufactured home. All ductwork connections shall be sealed to prevent air leakage. Installation, sealing and support of ductwork shall meet the requirements set forth at 24 C.F.R. §3285.606.
126.96.36.199 Water supply. Multi-section homes with plumbing in both sections require water-line crossover connections to join all sections of the manufactured home. Crossover design requirements are set forth at 24 C.F.R. §3280.609. When the local water supply pressure exceeds 80 psi to the home, a pressure-reducing valve shall be installed. Standards for installation of the mandatory shutoff valve, freezing protection and testing procedures are set forth at 24 C.F.R. §3280.609.
188.8.131.52 Drainage system. Multi-section homes with plumbing in more than one section require drainage system connections to join all sections of the home. Installation, assembly, support and testing of drainage systems shall meet the requirements set forth at 24 C.F.R. §3285.604.
9.7.3 Fuel supply systems. The gas piping system in the home shall be designed for pressure that is at least 7 inches of water column and not more than 14 inches of water column. Installation, crossovers and testing shall meet the requirements set forth at 24 C.F.R. §3285.605.
9.8 Electrical systems. Pursuant to 24 C.F.R. §3285.701, multi-section homes with electrical wiring in more than one section require crossover connections to join all sections of the home. Pursuant to 24 C.F.R. §3285.702, exterior lighting fixtures, ceiling-suspended fans and chain-hung lighting fixtures shall be installed as required by their listings and 24 C.F.R. §3280. Installation, grounding and testing shall meet the requirements set forth at 24 C.F.R. §3285.702. Pursuant to 24 C.F.R. §3285.703, smoke alarms shall be functionally tested as required by the manufacturer instructions and shall be consistent with 24 C.F.R. §3280.208. Considerations concerning installation of telephone and cable TV are set forth at 24 C.F.R. §3285.906.
9.9.1 Exterior close-up. Pursuant to 24 C.F.R. §3285.801, exterior siding and roofing needed to join all sections of the manufactured home shall be installed according to manufacturer installation requirements consistent with 24 C.F.R. §§3280.305 and 3280.307. Weatherproofing and installation of hinged roofs and eaves shall meet the requirements of 24 C.F.R. §3285.801.
9.9.2 Structural interconnection of multi-section homes. Pursuant to 24 C.F.R. §3285.802, for multi-section homes, structural interconnections along the interior and exterior at the mate-line are required to join all sections of the home. Structural interconnection and closing of gaps shall meet the requirements set forth at 24 C.F.R. §3285.802.
9.9.3 Interior close-up. Pursuant to 24 C.F.R. §3285.803, all shipping blocking, strapping or bracing shall be removed from appliances, windows and doors. Installation of shipped-loose wall paneling shall meet the requirements of §3285.803.
9.10 Skirting. Pursuant to 24 C.F.R. §3285.504, skirting, if installed, shall be of weather-resistant materials or provided with protection against weather deterioration at least equivalent to that provided by a coating of zinc on steel of not less than 0.30 oz./ft.2 Installation of skirting shall meet the requirements set forth at 24 C.F.R. §3285.504.
9.11 Completion of operational checks and adjustments. Upon completion of installation, installer shall check all items listed in Rule 9.0 and shall make any needed adjustments to ensure compliance with all HUD requirements.
11.4 The decal shall be permanently affixed in plain view next to the manufactured home data plate. In the absence of a data plate, the decal shall be permanently affixed in the interior breaker panel box.
12.1 A licensee shall prominently display the words "Licensed Manufactured Home Installer" or the abbreviation “Lic. Mfd. Home Installer” and his license number on the exterior of all vehicles used for work in not less than two inch letters and numbers.
12.2 Only an individual who is registered with the Board and holds a license as a manufactured home installer may use the designation "Licensed Manufactured Home Installer" and other designations which suggest that the user is a licensed manufactured home installer.
12.3 No individual, sole proprietorship, partnership, corporation, or any other entity authorized under Delaware law or a similar statute of another state shall hold him/her/itself or otherwise use the title or designation "licensed manufactured home installer or any other title, designation, or abbreviation of any titles or designations likely to be confused with "licensed manufactured home installer".
13.1 Election of Officers. Beginning in 2007, the Board shall elect officers to serve for a one year term from April 1-March 31. Elections shall be held annually and shall occur no earlier than 3 months prior to April 1.
13.2.1 President - The president shall preside at all meetings, designate subordinates when provided by law, sign correspondence on behalf of the Board, and perform other functions inherent in the position. In conducting meetings or hearings, the President may limit or exclude evidence as provided under the Administrative Procedures Act unless overruled by a majority of the Board.
13.2.4 Complaint officer - The complaint officer shall be a member who works with the investigator of the Division of Professional Regulation when complaints are investigated pursuant to 29 Del.C. §8807. The complaint officer shall report to the Board when complaints are closed and recuse himself from participating in disciplinary hearings involving matters that have been reviewed in his or her capacity as complaint officer.
14.1 If the Board requires a licensed installer to take over the work done by an unauthorized practitioner pursuant to Section 4416(b)(13), the Board will choose the licensed installer from among those licensed installers who have volunteered to perform such work, whose license is in good standing and not subject to probation, other discipline or a pending complaint, and whose business address in the jurisdiction of the same authorized inspection agency as the subject property and closest in proximity to the subject property. If there are no volunteers who qualify, then the Board shall select a licensee at random. A licensee selected at random may be excused from the performance of this duty if he presents evidence that it will cause a hardship.
14.2 If the Board requires a certified inspector to inspect work completed by an unauthorized practitioner pursuant to Section 4416(b)(13), the Board will choose a certified inspector employed by the authorized inspection agency in whose jurisdiction the manufactured home is situated.
15.1 If the report is received by the president of the regulatory Board, that person shall immediately notify the Director of Professional Regulation or his/her designate of the report. If the Director of Professional Regulation receives the report, he/she shall immediately notify the president of the regulatory Board, or that president's designate or designates.
15.2 The president of the regulatory Board or that president's designate or designates shall, within 7 days of receipt of the report, contact the individual in question and inform him/her in writing of the report, provide the individual written information describing the Voluntary Treatment Option, and give him/her the opportunity to enter the Voluntary Treatment Option.
15.3 In order for the individual to participate in the Voluntary Treatment Option, he/she shall agree to submit to a voluntary drug and alcohol screening and evaluation at a specified laboratory or health care facility. This initial evaluation and screen shall take place within 30 days following notification to the professional by the participating Board president or that president's designate(s).
15.4 A regulated professional with chemical dependency or impairment due to addiction to drugs or alcohol may enter into the Voluntary Treatment Option and continue to practice, subject to any limitations on practice the participating Board president or that president's designate or designates or the Director of the Division of Professional Regulation or his/her designate may, in consultation with the treating professional, deem necessary, only if such action will not endanger the public health, welfare or safety, and the regulated professional enters into an agreement with the Director of Professional Regulation or his/her designate and the president of the participating Board or that president's designate for a treatment plan and progresses satisfactorily in such treatment program and complies with all terms of that agreement. Treatment programs may be operated by professional Committees and Associations or other similar professional groups with the approval of the Director of Professional Regulation and the president of the participating Board.
15.5 Failure to cooperate fully with the participating Board president or that president's designate or designates or the Director of the Division of Professional Regulation or his/her designate in regard to the Voluntary Treatment Option or to comply with their requests for evaluations and screens may disqualify the regulated professional from the provisions of the Voluntary Treatment Option, and the participating Board president or that president's designate or designates shall cause to be activated an immediate investigation and institution of disciplinary proceedings, if appropriate, as outlined in subsection (h) of this section.
15.6.1 Entry of the regulated professional into a treatment program approved by the participating Board. Board approval shall not require that the regulated professional be identified to the Board. Treatment and evaluation functions must be performed by separate agencies to assure an unbiased assessment of the regulated professional's progress.
15.6.2 Consent to the treating professional of the approved treatment program to report on the progress of the regulated professional to the president of the participating Board or to that president's designate or designates or to the Director of the Division of Professional Regulation or his/her designate at such intervals as required by the president of the participating Board or that president's designate or designates or the Director of the Division of Professional Regulation or his/her designate, and such person making such report will not be liable when such reports are made in good faith and without malice.
15.6.4 Agreement by the regulated professional to be personally responsible for all costs and charges associated with the Voluntary Treatment Option and treatment program(s). In addition, the Division of Professional Regulation may assess a fee to be paid by the regulated professional to cover administrative costs associated with the Voluntary Treatment Option. The amount of the fee imposed under this subparagraph shall approximate and reasonably reflect the costs necessary to defray the expenses of the participating Board, as well as the proportional expenses incurred by the Division of Professional Regulation in its services on behalf of the Board in addition to the administrative costs associated with the Voluntary Treatment Option.
15.6.5 Agreement by the regulated professional that failure to satisfactorily progress in such treatment program shall be reported to the participating Board's president or his/her designate or designates or to the Director of the Division of Professional Regulation or his/ her designate by the treating professional who shall be immune from any liability for such reporting made in good faith and without malice.
15.7 The regulated professional's records of participation in the Voluntary Treatment Option will not reflect disciplinary action and shall not be considered public records open to public inspection. However, the participating Board may consider such records in setting a disciplinary sanction in any future matter in which the regulated professional's chemical dependency or impairment is an issue.
15.8 The participating Board's president, his/her designate or designates or the Director of the Division of Professional Regulation or his/her designate may, in consultation with the treating professional at any time during the Voluntary Treatment Option, restrict the practice of a chemically dependent or impaired professional if such action is deemed necessary to protect the public health, welfare or safety.
15.10 Failure to enter into such agreement or to comply with the terms and make satisfactory progress in the treatment program shall disqualify the regulated professional from the provisions of the Voluntary Treatment Option, and the participating Board shall be notified and cause to be activated an immediate investigation and disciplinary proceedings as appropriate.
15.11 Any person who reports pursuant to this section in good faith and without malice shall be immune from any civil, criminal or disciplinary liability arising from such reports, and shall have his/her confidentiality protected if the matter is handled in a nondisciplinary matter.
15.12 Any regulated professional who complies with all of the terms and completes the Voluntary Treatment Option shall have his/her confidentiality protected unless otherwise specified in a participating Board's rules and regulations. In such an instance, the written agreement with the regulated professional shall include the potential for disclosure and specify those to whom such information may be disclosed.
16.1 Conviction of any of the following crimes, or of the attempt to commit or of a conspiracy to commit or conceal or of solicitation to commit any of the following crimes, is deemed to be substantially related to the practice of manufactured home installation or manufactured home installation inspection in the State of Delaware, without regard to the place of conviction:
16.1.1 Reckless endangering in the first degree. 11 Del.C. §604
16.1.2 Assault in the first degree. 11 Del.C. §613
16.1.3 Criminally negligent homicide. 11 Del.C. §631
16.1.4 Manslaughter. 11 Del.C. §632
16.1.5 Murder by abuse or neglect in the second degree. 11 Del.C. §633
16.1.6 Murder by abuse or neglect in the first degree. 11 Del.C. §634
16.1.7 Murder in the second degree. 11 Del.C. §635
16.1.8 Murder in the first degree. 11 Del.C. §636
16.1.9 Unlawful sexual contact in the second degree. 11 Del.C. §768
16.1.10 Unlawful sexual contact in the first degree. 11 Del.C. §769
16.1.11 Rape in the fourth degree. 11 Del.C. §770
16.1.12 Rape in the third degree. 11 Del.C. §771
16.1.13 Rape in the second degree. 11 Del.C. §772
16.1.14 Rape in the first degree. 11 Del.C. §773
16.1.15 Sexual extortion. 11 Del.C. §776
16.1.16 Continuous sexual abuse of a child. 11 Del.C. §778
16.1.17 Kidnapping in the second degree. 11 Del.C. §783
16.1.18 Kidnapping in the first degree. 11 Del.C. §783A
16.1.19 Arson in the third degree. 11 Del.C. §801
16.1.20 Arson in the second degree. 11 Del.C. §802
16.1.21 Arson in the first degree. 11 Del.C. §803
16.1.22 Criminal mischief. 11 Del.C. §811
16.1.23 Burglary in the third degree. 11 Del.C. §824
16.1.24 Burglary in the second degree. 11 Del.C. §825
16.1.25 Burglary in the first degree. 11 Del.C. §826
16.1.27 Robbery in the second degree. 11 Del.C. §831
16.1.28 Robbery in the first degree. 11 Del.C. §832
16.1.29 Carjacking in the second degree. 11 Del.C. §835
16.1.30 Carjacking in the first degree. 11 Del.C. §836
16.1.31 Theft. 11 Del.C. §841
16.1.32 Theft of motor vehicle. 11 Del.C. §841A
16.1.33 Theft; lost or mislaid property; mistaken delivery. 11 Del.C. §842
16.1.34 Theft; false pretense. 11 Del.C. §843
16.1.35 Theft; false promise. 11 Del.C. §844
16.1.36 Theft of services. 11 Del.C. §845
16.1.37 Extortion. 11 Del.C. §846
16.1.38 Theft of rented property. 11 Del.C. §849
16.1.39 Receiving stolen property. 11 Del.C. §851
16.1.40 Identity theft. 11 Del.C. §854
16.1.41 Forgery. 11 Del.C. §861
16.1.42 Possession of forgery devices. 11 Del.C. §862
16.1.43 Forgery and related offenses. 11 Del.C. §863
16.1.44 Falsifying business records. 11 Del.C. §871
16.1.45 Tampering with public records in the second degree. 11 Del.C. §873
16.1.46 Tampering with public records in the first degree. 11 Del.C. §876
16.1.47 Offering a false instrument for filing. 11 Del.C. §877
16.1.48 Issuing a false certificate. 11 Del.C. §878
16.1.49 Bribery. 11 Del.C. §881
16.1.50 Bribe receiving. 11 Del.C. §882
16.1.51 Deceptive business practices. 11 Del.C. §906
16.1.52 Criminal impersonation. 11 Del.C. §907
16.1.53 Criminal impersonation of a police officer. 11 Del.C. §907B
16.1.54 Securing execution of documents by deception. 11 Del.C. §909
16.1.55 Insurance fraud. 11 Del.C. §913
16.1.56 Home improvement fraud. 11 Del.C. §916
16.1.57 New home construction fraud. 11 Del.C. §917
16.1.58 Dealing in children. 11 Del.C. §1100
16.1.59 Sexual exploitation of a child. 11 Del.C. §1108
16.1.60 Unlawfully dealing in child pornography. 11 Del.C. §1109
16.1.61 Possession of child pornography. 11 Del.C. §1111
16.1.62 Sexual offenders; prohibitions from school zones. 11 Del.C. §1112
16.1.63 Sexual solicitation of a child. 11 Del.C. §1112A
16.1.64 Bribery. 11 Del.C. §1201
16.1.65 Receiving a Bribe. 11 Del.C. §1203
16.1.66 Giving unlawful gratuities. 11 Del.C. §1205
16.1.67 Receiving unlawful gratuities. 11 Del.C. §1206
16.1.68 Improper influence. 11 Del.C. §1207
16.1.69 Official misconduct. 11 Del.C. §1211
16.1.70 Profiteering. 11 Del.C. §1212
16.1.71 Perjury in the third degree. 11 Del.C. §1221
16.1.72 Perjury in the second degree. 11 Del.C. §1222
16.1.73 Perjury in the first degree. 11 Del.C. §1223
16.1.74 Making a false written statement. 11 Del.C. §1233
16.1.76 Bribing a witness. 11 Del.C. §1261
16.1.77 Bribe receiving by a witness. 11 Del.C. §1262
16.1.78 Tampering with a witness. 11 Del.C. §1263
16.1.79 Interfering with a child witness. 11 Del.C. §1263A
16.1.80 Bribing a juror. 11 Del.C. §1264
16.1.81 Bribe receiving by a juror. 11 Del.C. §1265
16.1.82 Tampering with a juror. 11 Del.C. §1266
16.1.83 Misconduct by a juror. 11 Del.C. §1267
16.1.84 Tampering with physical evidence. 11 Del.C. §1269
16.1.85 Hate crimes. 11 Del.C. §1304
16.1.87 Carrying a concealed deadly weapon. 11 Del.C. §1442
16.1.88 Carrying a concealed dangerous instrument. 11 Del.C. §1443
16.1.89 Possessing a destructive weapon. 11 Del.C. §1444
16.1.90 Unlawfully dealing with a dangerous weapon. 11 Del.C. §1445
16.1.91 Unlawfully dealing with a switchblade knife. 11 Del.C. §1446
16.1.93 Possession of a firearm during the commission of a felony. 11 Del.C. §1447A
16.1.95 Receiving a stolen firearm. 11 Del.C. §1450
16.1.96 Theft of a firearm. 11 Del.C. §1451
16.1.97 Unlawfully dealing with knuckles-combination knife. 11 Del.C. §1452
16.1.98 Unlawfully dealing with martial arts throwing star. 11 Del.C. §1453
16.1.99 Giving a firearm to person prohibited. 11 Del.C. §1454
16.1.101 Unlawfully permitting a minor access to a firearm. 11 Del.C. §1456
16.1.105 Criminal Penalties, Organized Crime and Racketeering. 11 Del.C. §1504
16.1.106 Act of intimidation. 11 Del.C. §3532
16.1.107 Aggravated act of intimidation. 11 Del.C. §3533
16.1.108 Prohibited Acts A; penalties. 16 Del.C. §4751
16.1.109 Prohibited Acts B; penalties. 16 Del.C. §4752
16.1.110 Unlawful delivery of non controlled substance. 16 Del.C. §4752A
16.1.111 Prohibited Acts C; penalties. 16 Del.C. §4753
16.1.113 Prohibited acts D; penalties. 16 Del.C. §4754
16.1.114 Possession and delivery of non controlled prescription dug. 16 Del.C. §4754A
16.1.115 Prohibited acts; penalties. 16 Del.C. §4756
16.1.118 Purchase of drugs from minors; penalties. 16 Del.C. §4761A
16.1.121 Drug paraphernalia. 16 Del.C. §4771(a) and (b)
16.1.122 Penalties [drug paraphernalia]. 16 Del.C. §4774
16.1.123 Attempt to evade or defeat tax. 30 Del.C. §571
16.1.124 Failure to collect or pay over tax. 30 Del.C. §572
16.1.126 Fraud and false statements. 30 Del.C. §574
16.1.127 Obtaining benefit under false representation. 31 Del.C. §1003
16.1.128 Reports, statements or documents. 31 Del.C. §1004(1)-(4)
16.1.129 Unlawful possession or manufacture of proof of insurance. 21 Del.C. §2118A
16.1.132 False statements. 21 Del.C. §2752
16.1.133 Removed, falsified or unauthorized identification number on vehicle, bicycle or engine; removed or affixed license/registration plate with intent to misrepresent identity; penalty. 21 Del.C. §6705(a)-(e)
16.1.137 Permits Required [regarding environmental control]. 7 Del.C. §6003
16.2 Crimes substantially related to the practice of manufactured home installation or manufactured home installation inspection shall be deemed to include any crimes under any federal law, state law or valid town, city or county ordinance, that are substantially similar to the crimes identified in this rule.